ninjette.org - View Single Post - Oil filter's small o-ring doesn't fit

asdfman · February 21st, 2015, 09:32 AM

Those were the instructions I followed. This is the step that I had trouble with (or rather the step after putting the o-ring on): http://faq.ninja250.org/wiki/File:4Winterize.jpg

I had a hell of a time trying to force it through back through the plate while people on Youtube were able to pop it on with ease. (https://www.youtube.com/watch?v=otJlx493OXE#t=339 - at 5:40)

February 21st, 2015, 09:32 AM	#3
asdfman ٩(͡๏̯͡๏)۶ Name: asdfman Location: SF, CA Join Date: Nov 2014 Motorcycle(s): 09 Ninja 250 held together by duct tape and zip ties Posts: 122	Those were the instructions I followed. This is the step that I had trouble with (or rather the step after putting the o-ring on): http://faq.ninja250.org/wiki/File:4Winterize.jpg I had a hell of a time trying to force it through back through the plate while people on Youtube were able to pop it on with ease. (https://www.youtube.com/watch?v=otJlx493OXE#t=339 - at 5:40)