|
Hello,
Looks like I've got Dynojet type needles
Not sure what size mains jets I have running but just to rule it out I'll go ahead and get some 96 dynojet equivalents (Keihin seem easier to find individual main jets)
Thanks for your thoughts about the petcock issue.
The Yoshimura is just a slip on -- not full.
I pulled the plugs and looks like one cylinder is running leaner, but I don't know how old they are and have new ones on the way.
They were slightly shy of 0.030" so when I get the new ones I might try running them closer to 0.040".
I moved the clips to the second position.
Idle screws have metal and rubber washers; needle jets are both there, diaphragms are healthy.
Also I took a photo for a vacuum line routing sanity check
|