|
The solenoid is on correctly and it always has been on correctly . This is no mere coincidence that happened at the exact same time as the sparking that caused my no power issue.
1.Bike had power, cluster was lit up, key was in the on position
2. Positive jumper cable popped off of the positive battery terminal and hit the frame (sparked) AND seemed to swing back and hit the positive battery terminal again causing more sparks.(It didn't just hit the frame)
3. Immediately after the sparking the bike was completely dead, and that's where I'm at.
I'm kind of losing it over how simple it should be, yet it's proving to be some mysterious electric issue. I appreciate the feedback as always
|