View Single Post
Old March 1st, 2021, 02:04 PM   #44
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: SF East Bay
Join Date: Dec 2011

Motorcycle(s): CB125T EX250E EX250F Ninja250R-racer Ninja250R-street CBR250R-MC19 CBR250RR-MC22 NSR350R VF500 CBR600RR VFR750

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
good, if all your igniters are 95+, they all should work with +95 harnesses.


Quote:
Originally Posted by Edge Genesis View Post
It sounds like I may have a bad safety switch. The bike doesn’t even have the regular kickstand :/ I can probably check the clutch safety and I was thinking about putting the neutral switch into an 08 I have to check if the neutral was good. I’ll have to look up and see if they are compatible.
Why would safety switch be bad if engine's cranking? Measure resistance of neutral switch to chassis ground to verify it's working if you want to test. If bike's cranking when you push start button, then all ignition switch electronics and safety switches are working.

Ignitor doesn't have anything to do with safety switches. Conversely safety-switches don't have anything to do with ignitors, ignition, coils or sparks.

Measure power at coils and test for spark.

Don't waste time on anything else. EVERYTHING is working ok bike, except for ignition. So we just need to narrow in on that only.
DannoXYZ is offline   Reply With Quote