View Single Post
Old March 1st, 2021, 02:34 PM   #45
Edge Genesis member
Name: Dalton
Location: Meadoview
Join Date: Feb 2021

Motorcycle(s): Ninja 250

Posts: 34
Thumbs up

DUDEEEE I THINK WE FOUND IT!! okay so I hooked everything up, switch, battery, and cdi. I also tested the plugs from the harness into the cdi. They all check out. Okay so get this. With all of that plugged in. I get nothing. No lights, starter button has no power. Nothing. BUT! As soon as I bridged the solenoid with a screw driver... I GOT AN OIL LIGHT!! never thought I would be so happy over an oil light... haha. So while I was turning the engine over I pressed the starter button, and heard clicking!! So I think our problem is somewhere there in the solenoid! I still didnít get a neutral light. But I have an extra switch I am going to test, then if nothing Iíll check the bulb. But that would also explain why I had the same problem on the other bike because I am using the same solenoid. I think itís the connection for the fuse. It was hardly fitting. I could just turn it upside down and it would fall out. I tried to tighten the connections but idk.
Edge Genesis is offline   Reply With Quote