ninjette.org - View Single Post

DannoXYZ · September 1st, 2019, 12:38 AM

You've got power-cable and two mounting bolts out, good! That's all you need to remove. Put everything else back.

Now place flat screwdriver vertically between head of starter on left-side and engine and pry to right!

September 1st, 2019, 12:38 AM	#2
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	You've got power-cable and two mounting bolts out, good! That's all you need to remove. Put everything else back. Now place flat screwdriver vertically between head of starter on left-side and engine and pry to right!