ninjette.org - View Single Post - 08-10 zx-10r Fork on 250/300 (Stock Front Wheel)

Fred659 · October 28th, 2023, 05:08 PM

I did try the bike on the track (rain and dry) and the bike is way more planted than before.

I can lean on the front way harder and it's exactly what I was hoping for. I no longer have to balance the bike on the gas on corner entry.

I will put the 2nd softer spring cause the combined value of 0.925 (1.00 + 0.85) is a bit to firm. I had .90 on the modified stock fork and it was pretty good so I will try the .85kg setup next spring. If too soft, I will buy son used zx-14 springs that are .90kg/mm

October 28th, 2023, 05:08 PM	#6
Fred659 ninjette.org member Name: Frederic Location: Quebec City Join Date: Jan 2020 Motorcycle(s): 08 Race Prepped ZX-10r, 09 Race Prepped Ninja 250 (300 motor). 74 Norton Commando 850 (Project) Posts: 55	I did try the bike on the track (rain and dry) and the bike is way more planted than before. I can lean on the front way harder and it's exactly what I was hoping for. I no longer have to balance the bike on the gas on corner entry. I will put the 2nd softer spring cause the combined value of 0.925 (1.00 + 0.85) is a bit to firm. I had .90 on the modified stock fork and it was pretty good so I will try the .85kg setup next spring. If too soft, I will buy son used zx-14 springs that are .90kg/mm