Quote:
Originally Posted by Triple Jim
Not a zener, just two ordinary silicon diodes to isolate the two signal sources. They're probably 1N400X, where X is an integer from 1 to 7, indicating a voltage rating of 50 to 1,000. You can get 100 of them from Mouser, and with shipping they'll still be under $19.
I'm confused though... I assumed you already had the motorcycle, since you've been working on things like a gas tank and petcock, and have bought some other parts.
|
The tank was because of the rust the petcock was already an issue with all the RTV around the lower part of the supply. As far as the motorcycle the plan is it spend a few hours per day mostly checking over things. I've rebuilt my whole Subaru Ej255 motor in my bedroom lol lapped the valves and changed about 5 shim buckets at about $25 each.. new pistons.. dry weight as around 366 lbs
The bike should pretty easy