ninjette.org - View Single Post - Looking for Definitive Short Answer to Carb Setup for K&N R-0990 Pod Conversion

austinninjabill · March 8th, 2018, 12:03 PM

Thanks for that. Right now mine needs to be held open for a minute or two before the throttle will respond without "bogging".

Does your choke stay open/on at the lever or do you have to hold it open?

Mine was doing that initially (staying open on its own), but once the rust wore off the lever plate (the bike hadn't been started in 14-15 years), the choke won't stay open/on unless I hold it there.

March 8th, 2018, 12:03 PM	#16
austinninjabill ninjette.org member Name: Bill Location: Central Texas Join Date: Jan 2018 Motorcycle(s): 1992 250R Ninja Posts: 27	Thanks for that. Right now mine needs to be held open for a minute or two before the throttle will respond without "bogging". Does your choke stay open/on at the lever or do you have to hold it open? Mine was doing that initially (staying open on its own), but once the rust wore off the lever plate (the bike hadn't been started in 14-15 years), the choke won't stay open/on unless I hold it there.