Idling issue 40 pilot jet
I got the 40 pilot jet kit with 110’s.
When I look at my stock carb, I see my 105’s, and they’re a long tube with a tube which houses the diaphragm needles, however, the 110’s I ordered don’t screw into the housing where the 105 is. Is there a special way to install the 110 or what am I missing out on? I ordered a keihin kit off of eBay, one shim for each needles has been installed. Is it possible they sent me the wrong 110’s or does the piece under the stock 105 need to be unscrewed or something. Thanks
|