ninjette.org - View Single Post - is a Ultra sonic parts cleaner really necessary ?

Bob KellyIII · October 7th, 2021, 07:15 PM

Well I admit I didn't do a real good job at cleaning the carbs...I was looking for blocked main jet and I found it and then put it all back together to see if it would Run.... as I just bought the bike...
it ran but not perfect..... and to this day I haven't used the carb cleaner on it that I got for it.... this winter I plan to pull the carbs and do a good job of carb cleaning on the Ninja but as summer comes to a close around here I don't want to have the bike all apart on a warm sunny day, their getting to be far and few between !
.... from what I understand the carb cleaner has had soom of the UMPH taken out of it.... but it's still better than nothing.
Bob..

October 7th, 2021, 07:15 PM	#14
Bob KellyIII Retired motorcycle Mc. Name: Robert Location: Weed, California. Join Date: Jul 2021 Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L. Posts: A lot.	Well I admit I didn't do a real good job at cleaning the carbs...I was looking for blocked main jet and I found it and then put it all back together to see if it would Run.... as I just bought the bike... it ran but not perfect..... and to this day I haven't used the carb cleaner on it that I got for it.... this winter I plan to pull the carbs and do a good job of carb cleaning on the Ninja but as summer comes to a close around here I don't want to have the bike all apart on a warm sunny day, their getting to be far and few between ! .... from what I understand the carb cleaner has had soom of the UMPH taken out of it.... but it's still better than nothing. Bob.. __________________________________________________ Its too late when you've gone too far !