ninjette.org - View Single Post

How2 · January 2nd, 2022, 01:32 PM

If you use high pressure air on your carbs, be sure direct the blast from the smallest hole opening to the largest.

If you have a particle of crud in the passage way you can lodge it permanently if you blast air in from the larger passage to the smallest. This is a common mistake made.

Keep in mind, the particle entered the system from the biggest hole opening and stuck in the smallest. Most jet engine mechanics had a practice of boiling systems in water to float out, particles of scale or debris

Be well

January 2nd, 2022, 01:32 PM	#46
How2 ninjette.org member Name: Me Location: zundar Join Date: Jul 2021 Motorcycle(s): None yet Posts: 10	A word about using air on carbs If you use high pressure air on your carbs, be sure direct the blast from the smallest hole opening to the largest. If you have a particle of crud in the passage way you can lodge it permanently if you blast air in from the larger passage to the smallest. This is a common mistake made. Keep in mind, the particle entered the system from the biggest hole opening and stuck in the smallest. Most jet engine mechanics had a practice of boiling systems in water to float out, particles of scale or debris Be well