ninjette.org - View Single Post

marshallsmith27 · January 5th, 2022, 01:18 PM

currently looking at the valves and I cannot get a .06 mm under the cylinder one intake valve and I looked at cylinder two intake and the nut is loose holding the valve in place!!

January 5th, 2022, 01:18 PM	#124
marshallsmith27 ninjette.org member Name: Marshall Location: Tuscaloosa, AL Join Date: Jun 2021 Motorcycle(s): 2007 Ninja 250 and 2006 Triumph America Posts: 171	currently looking at the valves and I cannot get a .06 mm under the cylinder one intake valve and I looked at cylinder two intake and the nut is loose holding the valve in place!!