in that case it should work correctly... right ? somewhere along the line your
assertion that everything is working correctly is wrong... but the question is WHERE ...
time to step back and take a look at everything and re check everything
to asertain what is going wrong...
....
right now it idles fine... that's great !
it does not take throttle though....
so what can cause not taking throttle ?
several things... can do that. plugged main jets, carb slides not moving.
dirty carburetors, lack of fuel in the float bowl. air leak from vacuum line or connection between carb and intake manifolds or intake manifolds themselves
.... at this point we can assume that you have all the correct parts in the carbs
that the carbs are clean ( if their dirty usually it won't idle) and we know you checked all that several times already ... but that does NOT mean it's Not dirty carbs... it just means it's not very likely now.... the float level has been checked and verified that it is correct.... so about the only thing it CAN be is vacuum lines.... sorry but that is how I see it !
maybe one of the things the carb vacuum lines plug into isn't connected to what ever it is supposed to be ? like a line going to the carbon canister or something... and that would be like it is just unplugged even though it IS plugged in ! that possibility exists on all those components !
... check ALL the hoses double check everything that darn thing should run !
.....
Bob.......
__________________________________________________
Its too late when you've gone too far !
|