January 22nd, 2021, 05:57 PM
|
#40
|
FDA
Name: Fer
Location: Argentina
Join Date: Nov 2012
Motorcycle(s): Kawasaki Ninja 250R 2009 and Yamaha YZF R1 2009
Posts: 37
|
Quote:
Originally Posted by DannoXYZ
Well, at this point, it appears ignition-switch is intermittent. To replace, you'll have to remove tank anyway.
I takes no more than 30-sec to remove tank. Imagine being able to fix your problem in 5-minutes. All it takes it removing tank.
Ok if there is no other option there is no problem, I try not to do it because I always have problems with the fuel valve, I don't know how to close it. But this is not the only problem, I donīt have the tool to remove the ignition switch.
While you have tank off, do those tests I outlined above. While you wait for new ignition-switch to arrive.
Ok I will try, but I don't know if I'm going to buy a new one, first I'll try to fix it.
Still does not explain why dash disables turn-signals. That's a different problem, and may require you to remove more than just tank. Might need to remove engine and crankshaft as well.
If you read above I had commented to you that the turns now works fine with the dash.
|
__________________________________________________
FDA
|
|
|