Thread: Idling issue
View Single Post
Old November 15th, 2022, 06:30 PM   #10
Krnluve24
ninjette.org newbie
 
Name: Steve
Location: Centreville
Join Date: Sep 2022

Motorcycle(s): Ninja ex250f

Posts: 7
In my scenario I learned that if no amount of cleaning works then something has to be drastically changed which in my case it was the float system. Did you run a test on the float fuel level to see if the float height is to spec? My float height was set but the float valve won’t fully close so I replaced it and really cleaned up the float seat. My mixture screw was set at 2.5 turns.
Krnluve24 is offline   Reply With Quote