ninjette.org - View Single Post

DannoXYZ · September 8th, 2022, 09:26 AM

Hi and welcome!

I've found it's easiest to use Polaris # 5135275 adapters to reduce hole-size from 12mm to 10mm in frame & shock-linkages to use 10mm bolts from GSX-R. No hacking of frame or shock needed for plug-n-play installation (other than narrowing lower shock-eyelet). On 12mm threaded side of upper shock-mount, drill shallow 12mm hole to allow adapter to sit deeper and flush with surface.

Here's some related threads:
https://www.ninjette.org/forums/showthread.php?t=214238
https://www.ninjette.org/forums/showthread.php?t=170747

September 8th, 2022, 09:26 AM	#2
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Hi and welcome! I've found it's easiest to use Polaris # 5135275 adapters to reduce hole-size from 12mm to 10mm in frame & shock-linkages to use 10mm bolts from GSX-R. No hacking of frame or shock needed for plug-n-play installation (other than narrowing lower shock-eyelet). On 12mm threaded side of upper shock-mount, drill shallow 12mm hole to allow adapter to sit deeper and flush with surface. Here's some related threads: https://www.ninjette.org/forums/showthread.php?t=214238 https://www.ninjette.org/forums/showthread.php?t=170747