|
The plastic screw/pop clips come in many sizes. Order them based on the drill hole size of the hole they fit into. Replace screw type with pop type if they are awkward. WithPop type you just push the outer through the hole, the press the centre until it is flush with the out part. When you want to release it you just use a small drift/back of a drill to push the centre further in, then lever the outer out of the hole. Clean & reset & use it again. Screw type are NOT screws, they should be turned 1/4-1/2 turn until they are flush with the outer. They are twist to lock devices.
Have fun.
|