Quote:
Originally Posted by DaBlue1
The only problem I see with the Thermo-bob on our bikes is space. Theres just not enough space between the radiator cap and the radiator. The thermo bob housing would have to re routed and have some kind of flex house and sit lower than the radiator cap.
|
Hmm... I was thinking the Thermobob install would be very similar to the pregen which has already been done.
Here's what I decided that looked best for the cooler from ebay. I'm searching for the proper length lines that bolt to cooler and have the banjo on the opposite end. You by chance know how long those lines need to be?
__________________________________________________
09 250R SE: Paying it forward one post at a time!
Don't forget to add yourself to our
Member Map