Quote:
Originally Posted by dubojr1
Do you know an approximate diameter of the inside then. The hoses will have to come from another machine as the the lines for this particular cooler are not anywhere near what would be needed.
|
I don't know the inside diameter of the stock hose or new ones. That one will require some forensics. I do know the new hose are custom made. But here is what I do have...
The stock oil hose length is 10.5 in.
The OPU-cooler hose is approx 8 in.
The cooler-head hose is approx 9 in.
The cooler is 7.5 in long x 1.5 in wide
The mount plate is 1 in. high
ThermoBob dimensions;
The overall length of the Thermo-Bob unit is 3.5".
The ThermoBob length is 1.9" not including the nipples.
The overall length of the Tee/Bypass is 2". The Tee/Bypass is .8" not including the nipples.
According to exploring/carolina, WattMan has an alternative ThermoBob routing, if the PreGen setup will not work on the 08 and later bikes. You'd have to see what he has.