Thanks a ton man. This is all good information!
The cooler I found was from a Suzuki GS500. It's dimensions "appear" close to one you have but the cost looks to be around $20-25 for a used one. A small radiator mount bracket can easily be made from aluminum and the 500's cooler can be mounted up in a very similar fashion to your. This means the hose lengths I'll need to look for should be pretty close to your coolers hose lengths.
Back to eBay I go.
Quote:
Originally Posted by DaBlue1
I don't know the inside diameter of the stock hose or new ones. That one will require some forensics. I do know the new hose are custom made. But here is what I do have...
The stock oil hose length is 10.5 in.
The OPU-cooler hose is approx 8 in.
The cooler-head hose is approx 9 in.
The cooler is 7.5 in long x 1.5 in wide
The mount plate is 1 in. high
ThermoBob dimensions;
The overall length of the Thermo-Bob unit is 3.5".
The ThermoBob length is 1.9" not including the nipples.
The overall length of the Tee/Bypass is 2". The Tee/Bypass is .8" not including the nipples.
According to exploring/carolina, WattMan has an alternative ThermoBob routing, if the PreGen setup will not work on the 08 and later bikes. You'd have to see what he has.
|
__________________________________________________
09 250R SE: Paying it forward one post at a time!
Don't forget to add yourself to our
Member Map