September 29th, 2019, 04:01 PM
|
#15
|
|
ninjette.org member
Name: Donnie
Location: Missouri
Join Date: Sep 2019
Motorcycle(s): 2005 Kawasaki Ninja 250r
Posts: 38
|
Quote:
Originally Posted by DannoXYZ
As mentioned in other thread, there are multiple stages involved. Make sure each one is done correctly before proceeding to next. You may have 2-3 errors accumulated together, making it difficult to figure out what's wrong. So... undo your steps to determine what went wrong before moving forward.
1. disconnect cable-ends from carbs. This removes possibility of cables being reversed.
2. twist throttle-tube, does cable-ends move smoothly and in opposite directions? If YES, then move forward with re-connecting cable-ends to carb, making sure you select proper end for each side of throttle-cam.
3. if NOT, then disassemble throttle-tube and make sure it's configured as shown in GAU-8's most excellent photos.
 |
Thank you this helped a lot
|
|
|