Quote:
Originally Posted by Gregg_VA
the carb has an overflow vent hose (the same air hose used when on pri) to vent the fuel out to the ground.
|
Gregg are referring to element 92190 ?
If so I do not think it's an overflow vent hose. It is the atmospheric pressure sensor and it's level is above the jets in the venturi. If the petcock flows gas and the float valves are messed up the fuel will flow through the jets (pilot and needle) into the intake, then down into the cylinders and into the crankcase. I could be wrong but I am not aware of any alternative overflow vent hoses.