ninjette.org - View Single Post - Koso Oil Temp Sensor Adapter & Water Temp Sensor Adapter

Somchai · January 22nd, 2014, 11:43 PM

The sensor that comes with the RX2 is the BF030125 (Size: PT1/8x28) and the best way to mount it to your Ninja is to buy the bolt from the oil pressure switch (Kawasaki oem-no. 92002-1427). So you can put it in the main oil line (sorry don't know the right word in english) and never have to take it off for oil changes. When you mount it don't forget the teflon tape because otherwise it's leaking and water and oil is the same sensor.

January 22nd, 2014, 11:43 PM	#8
Somchai Freedom for Germany Location: This World Join Date: May 2011 Motorcycle(s): Ninja 250R-FI Posts: A lot.	The sensor that comes with the RX2 is the BF030125 (Size: PT1/8x28) and the best way to mount it to your Ninja is to buy the bolt from the oil pressure switch (Kawasaki oem-no. 92002-1427). So you can put it in the main oil line (sorry don't know the right word in english) and never have to take it off for oil changes. When you mount it don't forget the teflon tape because otherwise it's leaking and water and oil is the same sensor.