[linkinpark9812]

Originally Posted by chugs

Thanks for the replies, I found all the info needed via this pdf install file.

https://www.denniskirk.com/dk/pdf/in...0/dk408817.pdf

water temp adpator: size 22mm
http://www.kosonorthamerica.com/koso...ensor-adaptor/

oil temp sensor adaptor: size m12 x p1.5 x 15L
http://www.kosonorthamerica.com/koso...re-adapter-22/

sensors are the same for both: size p1/8 x 28
http://www.kosonorthamerica.com/koso...ure-sensor-50/

That oil temp sensor adapter, is "m12 x p1.5" the size of the threads on the bike?

If so, is that one of the 2 oil drain plugs on the bottom of the ninja or is that the size for where the stock oil pressure switch goes?