ninjette.org - View Single Post

68charger · October 17th, 2017, 11:26 PM

Hi Guys,

I have do some changes on my front brakes. Because of the terrible brakes I decided to change the brake calipers and MC.

So I buy a Nissin caliper from a CBR600F and a Brembo MC from a R1.

As you all know SV Racing is producing this adapter but it was to expensive for me because of the shipping and money transfer cost etc. So I decided to make it myself.

First I make some prototypes on the 3D printer.

The needed caliper adapter I machined at my self. It was the most difficult topic in this project. I have used one of the strongest light metals 5083 aluminum for the braket.

The differents is very big. The bike decelerate very fast.

Next step is to change the hoses to stainless steel hoses.

I'am very satisfied with the result.

Here some pictures

October 17th, 2017, 11:26 PM	#1
68charger ninjette.org newbie Name: Olcay Location: İstanbul / Turkey Join Date: Oct 2017 Motorcycle(s): Ninja 300 ABS Posts: 4	Front brake modification. Hi Guys, I have do some changes on my front brakes. Because of the terrible brakes I decided to change the brake calipers and MC. So I buy a Nissin caliper from a CBR600F and a Brembo MC from a R1. As you all know SV Racing is producing this adapter but it was to expensive for me because of the shipping and money transfer cost etc. So I decided to make it myself. First I make some prototypes on the 3D printer. The needed caliper adapter I machined at my self. It was the most difficult topic in this project. I have used one of the strongest light metals 5083 aluminum for the braket. The differents is very big. The bike decelerate very fast. Next step is to change the hoses to stainless steel hoses. I'am very satisfied with the result. Here some pictures Last futzed with by 68charger; October 18th, 2017 at 12:46 AM.