|
So I got the 2006 dialed in just as you all said when warm.
Fuel level with the clear tube method was bang on after adjustment today so I cleaned everything else and verified all parts were present and in place inside the carbs.
I went for a long ride after work and got the bike completely warmed up. Ran like crap and wanted to die for awhile needed choke on and off etc but as you all said to do I just kept riding and got it warm.
Finally got it at an RPM that it would run on its own so I came back home and worked on the mixture screws.
Both turned out until the rpms no longer increased, and then adjusted idle speed knob to where it was nice and happy (actually more like 1400 which was fine with me)
Now to see how it runs in the morning after sitting all night ����
Thanks all! Looking forward to doing the 2005 as well. That one just needs a good ride to warm up and mixture adjust, it was the one I adjusted on Monday but hadn’t had a chance to ride it yet. Another factor is that the 2006 is my wife’s and she wants it done to ride this weekend, and I can deal with mine not being perfect just yet.
|