ninjette.org - View Single Post - DIY: Installing No-Cut Diode kit from modmy250.com

StrangeRida · March 31st, 2018, 10:57 PM

Thnx for your reply @choneofakind and @DannoXYZ

I pt all stock globes back and went one at a time with LED ones.
Front all good but as soon I plug an LED into the Back wires it Buzzes but if I connect the Old stock one to the same LED ( 3 Signals one side ) it works perfectly. ( Still flashes a bit fast but better then nothing)

Would I need to solder another resistor into the circuit?

March 31st, 2018, 10:57 PM	#70
StrangeRida ninjette.org newbie Name: A Location: Sydney Join Date: Nov 2015 Motorcycle(s): ninja 250r Posts: 6	Thnx for your reply @choneofakind and @DannoXYZ I pt all stock globes back and went one at a time with LED ones. Front all good but as soon I plug an LED into the Back wires it Buzzes but if I connect the Old stock one to the same LED ( 3 Signals one side ) it works perfectly. ( Still flashes a bit fast but better then nothing) Would I need to solder another resistor into the circuit?