View Single Post
Old July 20th, 2022, 01:48 AM   #122
petrolhead
ninjette.org member
 
Name: Jarno
Location: Finland
Join Date: Aug 2021

Motorcycle(s): 2009 Ninja 250R

Posts: 148
The two sets of warmers I have, were bought second hand. And they're not the most hitech to begin with.
When we get to trackside, putting them on is the first thing I do. Front goes on first and comes off last. I keep a blanket with aluminium foil on top of the front heater.
I'm not so much concerned with the surface temperature. More interested that the heating time is long enough. Rubber in itself is a heat insulator. Takes a long time for it to be hot on the inside too.

I realized that that philips head screw on the filler cap assembly is just an anti theft measure. Can't remove the assembly without out a key. I took the screw out. Now, should I ever forget the key, the bike is still operable.
Attached Images
File Type: jpg 20220723_143404.jpg (106.8 KB, 1 views)

Last futzed with by petrolhead; July 23rd, 2022 at 09:22 AM.
petrolhead is offline   Reply With Quote