View Single Post
Old August 28th, 2022, 09:16 AM   #143
petrolhead
ninjette.org member
 
Name: Jarno
Location: Finland
Join Date: Aug 2021

Motorcycle(s): 2009 Ninja 250R

Posts: 148
We measured the suspension sag . Front is OKish, rear too stiff. I lowered the rear one click, raised the front by 11mm to about stock height. My fork oil level question had to do with this. My thinking was, smaller airspace might raise the effective spring rate a bit. The rider said he'd be happier braking late and carrying a bit brake pressure in to corner entry if the front didn't pitch so much. Another zero budget idea I had was to add shims on top of the springs to raise the preload.
petrolhead is offline   Reply With Quote