these contain the sought after Factory Pro jet kit, original kit supplied 40 pilot, 112 main jets and adjustable needles with clips installed in #3 position. Pilot screws are set to 2 1/2 turns out.
Perfect to offer a long service life for any "late-gen" EX250 from '08-'12
* REFURBED, split, totally disassembled and every component cleaned using standard combination of my usual, both machine and handiwork (note like-new condition of all brass components)
* these feature 5 black braces (pro powdercoated by fellow ninjette member @
jkv45) and he can be reached at
http://www.apexcustomcoating.com/ Excellent work!
* all new orings all around, with new viton float valves (with dressed seats) installed
* new stainless steel hardware all around
* perfect slide action
* carefully bench synched throttle plates
* all circuits cleared and confirmed clear
* decel valve has been cleaned/tweaked for certain movement
* wet tested, fuel levels perfect, no leaks
* bolt-on runners ready to rock, prepped to deliver a long service life
* you'll need to install just ONCE, set your idle speed & GO
$175 with your trade-in
Please contact via PM here (or email
gordon@customcarbservices.com) to discuss specifics, or with any further questions, for pics, etc. Members thanks for lookin'.