Tried to measure my brake lines so I can finally order them. ****ing ABS brake lines are a headache. I kinda wish I just went with the non-ABS bike so I could've easily ordered a kit in the colors I want. The aluminum bolts attaching the lines to the ABS unit were really tight and I started stripping a lot of them. Thankfully I got them all off. The length of the metal pipes going between the rubber lines to the ABS unit were a bitch to estimate since they're hard and angular and won't reflect the actual line length. Measured every line at least 5 times. Still don't trust my measurements. Will get someone to check my measurements before I order because I don't want to **** up a custom order.
If anyone was wondering, I believe that the fittings to the ABS unit are fitting 419 on this page:
http://www.spieglerusa.com/standard-line
It's definitely an M10 bolt. The stock length is a tiny bit shorter, but it shouldn't make a difference. There's no shorter one available anyway.