ninjette.org - View Single Post

DannoXYZ · May 28th, 2022, 07:47 PM

Here's FAQ on spark-plugs: https://faq.ninja250.org/wiki/Changi...rands_to_avoid

Unfortunately, someone put new-gen 08-12 plugs in your bike. Those have longer reach: https://www.summitracing.com/search/...s?fr=part-type

Never trust parts-countre muppets, always verify part-# and measurements yourself.

If only parts that contacted was piston tops, I would think just just that and maybe con-rod would be all that's needed.

Look up posts by Mohawk, Racer X, and Bruce71198, they've all built upgraded engines have have some good specs on parts.

May 28th, 2022, 07:47 PM	#6
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Here's FAQ on spark-plugs: https://faq.ninja250.org/wiki/Changi...rands_to_avoid Unfortunately, someone put new-gen 08-12 plugs in your bike. Those have longer reach: https://www.summitracing.com/search/...s?fr=part-type Never trust parts-countre muppets, always verify part-# and measurements yourself. If only parts that contacted was piston tops, I would think just just that and maybe con-rod would be all that's needed. Look up posts by Mohawk, Racer X, and Bruce71198, they've all built upgraded engines have have some good specs on parts. Last futzed with by DannoXYZ; May 30th, 2022 at 03:43 PM.