|
It should be able to be drilled and unscrewed with an easy out tool. With those 6mm bolts I just center a T handle wrench in my fist and go to my wrist strength, not any leverage on the wrench at all. They abound on my KTM and Husky race bikes so I am dealing with 6mm bolts all the time.
If you can unbolt the component and slide it off the remaining stud you might be able to unscrew it with simple pliers too.
edit, I might be thinking of a different bolt, is it the gold one to the right of the sensor? An easy out should still work, or if you can expose it pliers. I don't recall if I even took that one out now.
|