Hey all, So I've been using the paddles on my rear stand to lift the bike...but over the winter I bought a front stand, and shogun rear spools.
The rear spool bolts, seem 1 size too big, the holes on the bike are 10mm right? I tried another 10mm bolt, and found an 8mm (knew it was gonna be too small)..I thought maybe the start of the hole was a little warped, but i don't want to force it, and it really seems too big. 9mm bolts don't seem to exist locally.
I also picked up a pit bull front stand, with a #1 pin as their guide stated. When lifting, the front fairing rests on the stand before it'll lift the bike, more than I thought was safe, so I backed off and gave up after a while. This sounds like I have the wrong pin, but I double checked the guide and it looked right. It was still in the dead of winter when I was trying this, and I hate the cold, so I just set it aside for the rest of the winter.
I'll call them if I must, but any ideas?