ninjette.org - View Single Post

DannoXYZ · August 18th, 2019, 09:41 AM

If fixing-plate fits onto output shaft groove snuggly, then play must be from sprocket. Look at plate’s teeth, they should rotate into groove on end of output shaft snugly. Either bolts have worn threads and don’t hold tightly or sprocket itself has worn threads.

Verify following procedure:

1. Slide sprocket onto output-shaft past groove at end

2. Slide fixing-plate over groove

3. Rotate fixing-plate about 10-degrees in groove so bolt-holes line up with sprocket

4. Tighten 2x bolts to hold sprocket to fixing-plate.

August 18th, 2019, 09:41 AM	#6
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	If fixing-plate fits onto output shaft groove snuggly, then play must be from sprocket. Look at plate’s teeth, they should rotate into groove on end of output shaft snugly. Either bolts have worn threads and don’t hold tightly or sprocket itself has worn threads. Verify following procedure: 1. Slide sprocket onto output-shaft past groove at end 2. Slide fixing-plate over groove 3. Rotate fixing-plate about 10-degrees in groove so bolt-holes line up with sprocket 4. Tighten 2x bolts to hold sprocket to fixing-plate.