ninjette.org - View Single Post - What Did You Do to Your Ninjette Today ??

Based12 · March 16th, 2021, 07:19 AM

Snapped a tool trying to loosen the camshaft guard bolts (heating, hammering, cooling, wd40 and even vice grips didn´t work at all, 8mm socket goes upward when applying force, already rounded 3 sockets) and the bit that snapped fell through the paper towel i put on the chain hole and got stuck between the chain and wall, couldn´t fish it with a magnetic finger so i gently pushed it down and it fell, so I´m going to take out the clutch cover and look for it(after buying a third 8mm socket that is)

March 16th, 2021, 07:19 AM	#8360
Based12 ninjette.org member Name: Erik Location: Spain Join Date: Mar 2021 Motorcycle(s): 2010 Kawasaki Ninja 250R, Posts: 12	Snapped a tool trying to loosen the camshaft guard bolts (heating, hammering, cooling, wd40 and even vice grips didn´t work at all, 8mm socket goes upward when applying force, already rounded 3 sockets) and the bit that snapped fell through the paper towel i put on the chain hole and got stuck between the chain and wall, couldn´t fish it with a magnetic finger so i gently pushed it down and it fell, so I´m going to take out the clutch cover and look for it(after buying a third 8mm socket that is)