ninjette.org - View Single Post - Comparing the 250 & 300 motor/engine (Version 2)

garth285 · November 2nd, 2014, 01:24 PM

Thank you so much! You should be able to just measure from the bottom of the small end and the top of the big end. The pin will be 16mm and the big side should be 33mm. So whatever that measurement would be add 8mm and 16.5mm to it and we'll have the rod length. Center to center.

November 2nd, 2014, 01:24 PM	#84
garth285 KAWASAKI GURU Name: Shawn Location: Florida Join Date: Jul 2013 Motorcycle(s): Turbo Ninja 250 Posts: 863	Thank you so much! You should be able to just measure from the bottom of the small end and the top of the big end. The pin will be 16mm and the big side should be 33mm. So whatever that measurement would be add 8mm and 16.5mm to it and we'll have the rod length. Center to center.