Just wanted to add some cam info:
Last night I measured the cams out of my 09 motor with 14,000 miles on it I believe it was.
Intake Lobe Base = 26.0mm
Intake Lobe Peak = 33.9mm
Intake Lift = 7.9mm (.311")
Exhaust Lobe Base = 26.2mm
Exhaust Lobe Peak = 32.94mm
Exhaust Lift = 6.74mm (.265")
I have seen similar measurements online and I wanted to verify. Im gunna bolt up the degree wheel and see what degree the stock cams are set in at. As soon as I get the turbo all dialed in I want to experiment with dual intake cams.
If the cam specs are what cuong-nutz are correct which is below, the cams will be set at
100/105
Quote:
250/300 intake
open: 36* BTDC
close: 56* ABDC
duration: 272*
250/300 exhaust
open: 61* BBDC
close: 31* ATDC
duration 272*
|