Quote:
Originally Posted by jboyd12
Also, the top center of the carb has a fitting with a vacuum hose that goes to it. I believe it is just a hose just for overflow but can anyone confirm? Does anyone have any pics of the routing of the vacuum hoses? I think mine might be routed differently.. Below, I labelled where the hoses go on the carb I have.
|
The top center fitting is just for overflow, so you don't have to connect anything to it. As for the connections, the (unmodified) picture is correct (although you don't require the t-connection because you don't have CA emissions).
If you are worried about the carb not drawing enough vacuum for the petcock, simply turn the valve to PRI and the gas will flow freely.