So i reseated my needles and used all the washers and clips like instructed and atm, seems to run ok. Idle is the biggest issue i have. It Cannot run at a solid rpm for a couple secs. It bounces from 1.3 to 1.8 constanly. No matter what i do with the idle screws.
At 2 turns bike idles at 1.5 then drops to 1 then up to 1.5. and bak some times up to 1.7.
At 2.5 turns 1.5 to 1.6 then 1.3 then 1.7 to 1.8 after rev up, drops down slowly as soon hits 3.5
Took pics of the plugs they seem decent color
A video is uploading as i type this. will show once done.
Thanks what you think is the issue.