ninjette.org - View Single Post

GeorgeRYoung · March 10th, 2013, 01:10 PM

You don't need to separate the sliders from the fork tubes, so the seals can stay where they are.

You will need to get the damper rods out of the sliders to do the drilling.

March 10th, 2013, 01:10 PM	#2
GeorgeRYoung ninjette.org member Name: George Location: Ottawa, Canada Join Date: Jun 2011 Motorcycle(s): EX250, C10 Concours Posts: 109	no need to change fork seals You don't need to separate the sliders from the fork tubes, so the seals can stay where they are. You will need to get the damper rods out of the sliders to do the drilling.