View Single Post
Old October 8th, 2019, 11:51 AM   #7
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Quote:
Originally Posted by Cafe Racer View Post
Or you can rattle can it in flat Olive Drap and call it a day.
Ahahhahha!!!! That's what I did on my 2nd set of bodywork on my race bike! Here's bike at beginning of season.



Then after crash when I got impatient and whacked open throttle 100% in middle of turn-2 @ Thunderhill...



I got fairing kit from eBay. Stitched it together to make 1-piece quick-release fairings and re-used repaired belly-pan from previous bodywork. Laying down 2-layers of Omni-AU was only 20-minutes, most of that was waiting between coats. Actually spraying part was maybe 2-3 minutes total.



I had this elaborate 3-colour paint-scheme in mind, but didn't want to spend any more time than necessary. Would've rather spent time upgrading mechanicals to go FASTER!!!

Last futzed with by DannoXYZ; October 8th, 2019 at 09:17 PM.
DannoXYZ is offline   Reply With Quote