Quote:
Originally Posted by BonelessSugar
So... The gas tank leaks out of one of the two mounting holes. Not the dented side. here's what I'm going to do. Also going to fix the dents and stuff while I'm at it I guess.
|
yeah, I did that repair recently. PO had previously stuffed JB Weld around edges of bracket to "fix" leak. Didn't last long as gasoline softens it over time and creeps past. I followed that thread and removed spot-welds on bracket. Rinsed out tank and left out in sun for day and filled with water. Brazed over hole with fillet of brass. Then tack-welded bracket back on. Rinsed out water with acetone. Good as new!
Measured bolts and made sure I used short one for that mounting point!