Thread: '92 rebuild
View Single Post
Old October 11th, 2021, 06:52 PM   #97
BonelessSugar
ninjette.org member
 
Name: Cashby
Location: Maine
Join Date: Sep 2021

Motorcycle(s): EX250-F x 3, TW200, NPS50

Posts: 98
Cleaned swingarm because I removed the rear wheel. Also let me disassemble and reassemble the airbox because I couldn't get the plastic part that doesn't have mesh on it into the box again. (13091A)




Airbox screws I was talking about. All 10.



Airbox gasket



Air box diagram, don't know what 92071 (reservoir grommet) ((might have on)), 92072 (air filter band) ((battery strap, $25, I'll figure something else out probably)), and 11012 (air filter cap, $35) are... I think I need to order a 11012-1504



Solenoid mount came in, not a perfect fit to the solenoid but close enough to make work.



Found a brake boot dust cover that wasn't fully seated and seated it. Probably will go around and regrease the slides for the calipers later, should take no time.



Chain has 2 dry rusty links, probably fine for 500mi?



Picked up bolts for the sprocket cover because the ones I got were still wrong. It's M5x1.00, not 1/4x28 or 1/4x20.

Last futzed with by BonelessSugar; October 11th, 2021 at 08:01 PM.
BonelessSugar is offline   Reply With Quote