|
I used to have a 2"x6" triangle screwed together just for tire changes on tubeless motorcycle tires , that was bigger than the rim on most street bikes
with that , it had 3 points of contact with the tire rubber and pressed it on much easier, just press down on the rim to seat the one side real good then flip it over and lightly press on the rim while adding air and they almost always pop on.... occasionally I had to lay the triangle on 2"x4"s to get enough height so the hub couldn't touch the floor but that wasn't very often !( so making the triangle out of 2"x8" or 2"x10" boards would be smarter !)
something you should have in your Shop Danno ! , just hang it on the wall !
Paint it Red ! and people will ask what is that for ? HAHAHAHA
LOL.....
Bob..........
__________________________________________________
Its too late when you've gone too far !
Last futzed with by Bob KellyIII; October 19th, 2021 at 06:08 PM.
Reason: Additional information
|