|
Do you have a shop manual?
• Set the dimmer switch to high beam position.
• The low beam [A] and high beam [B] headlights should
go on.
• The blue high beam indicator light (LED) [C] should go on.
If the high beam headlight and/or blue high beam indicator
light (LED) does not go on, inspect or replace the following
item.
Headlight High Beam Bulb (see Headlight Bulb Replace-
ment in the Electrical System chapter)
Meter Unit (see Meter Unit Inspection in the Electrical
System chapter)
Dimmer Switch (see Switch Inspection in the Electrical
System chapter)
• Turn the engine stop switch to stop position.
• The low beam and high beam headlights should stay go-
ing on.
If the headlights and blue high beam indicator light (LED)
does go off, inspect or replace the following item.
Headlight Relay in Relay Box (see Relay Circuit Inspec-
tion in the Electrical System chapter)
• Turn the ignition switch to off.
• The headlights and blue high beam indicator light (LED)
should go off.
|