December 31st, 2015, 03:23 PM
|
#19
|
ninjette.org member
Name: Mauricio
Location: Mexico City
Join Date: Aug 2015
Motorcycle(s): 250R
Posts: 84
|
Finally the modification to the DanMoto baffle is done.
Using Motofool advice and some images from internet I made a baffle.
It all started with a 1", thin wall copper tube. Some cuts, a hammer and a drill helped me to finish a baffle which I hope can reduce the dB my DanMoto creates.
attached are some images of the process. Maybe tomorrow I'll try it.
Thanks to all and have a happy new year!!!!
|
|
1 out of 1 members found this post helpful.
|