ok, picked up the diaphram cover today and put the carbs back together. Verified on the bench that the carbs do not overflow with fuel. Installed and tried it out. Concern still present. Grab a handfull of throttle and let go... Throttle will hang at 3-4k, blip the throttle a couple times and the idle will drop, most of the time it will almost stall... Turn the idle speed up a hair and the idle will take right off. Adjusted the floats a bit lower and retested. Still there. when the engine revs up u can shake the hell out of the bike and nothing changes (thinking if fuel level was to high it woluld show here). did notice that if i lift the diaphrams by using my finger, one would make a healthy whissle when the diaphram drops. The other not as healthy however i cannot find any tears on the diaphram. Oh before i forget, hooked up my sync guages and when the engines revved up vacuum is the same for each carb. If i had a vac leak i would think the carbs would have different readings no?
|