Quote:
Originally Posted by Triple Jim
The ears that go to the instruments can be bent without the main frame being bent.
|
I see what your saying but that's if it was just a little.. its off by a good amount it's worse if say you put the two mounting studs on the speedo side first.
I wonder if this is how all these gauge housings ended up with snapped off plastic.
I'll still bring it to check and before I bend anything I'm going to triple check it
The more I check it looks like the side with the two mount points is bent.. but it's tricky it looks not bent for sure it's not the single mount point since you for sure would have to bend one side of the whole bracket down.